ELECTRIC BLOWERS
LARGE-SIZED SERIES DENCHOKU
Ürün Dizisine Geri Dön
| Model | Boşaltma flanşı çapı (mm) | Şarj flanşı çıkışı çapı (mm) | Çıkış gücü (kW) |
|---|---|---|---|
| K1S4 | 360×460 | φ475 | 0.75、1.5、5.5 |
| K1S5 | 420×540 | φ540 | 1.5~3.7 |
| K1S6 | 480×610 | φ625 | 3.7~7.5 |
| K1S7 | 540×690 | φ700 | 5.5~11 |
| K1S8 | 600×770 | φ810 | 11~18.5 |
| K1S9 | 660×850 | φ890 | 15、18.5 |
| Model | Boşaltma flanşı çapı (mm) | Şarj flanşı çıkışı çapı (mm) | Çıkış gücü (kW) |
|---|---|---|---|
| M2S1 | 180×230 | φ240 | 0.75、1.5 |
| M2S2 | 240×300 | φ325 | 0.75~5.5 |
| M2S3 | 300×380 | φ400 | 1.5~15 |
| M2S4 | 360×460 | φ475 | 3.7~11 |
| M2S5 | 420×540 | φ540 | 7.5~18.5 |
| Model | Boşaltma flanşı çapı (mm) | Şarj flanşı çıkışı çapı (mm) | Çıkış gücü (kW) |
|---|---|---|---|
| T1S2 | 270×190 | φ265 | 1.5、2.2 |
| T1S3 | 340×205 | φ335 | 3.7~7.5 |
| T1S4 | 400×245 | φ400 | 7.5~18.5 |
| T1S5 | 470×285 | φ475 | 15~30 |
| T2S2 | 270×190 | φ265 | 0.75、1.5 |
| T2S3 | 340×205 | φ335 | 1.5~3.7 |
| T2S4 | 400×245 | φ400 | 3.7~11 |
| T2S5 | 470×285 | φ475 | 7.5~15、22 |
| T2S6 | 540×325 | φ540 | 15~22 |
| Model | Boşaltma flanşı çapı (mm) | Şarj flanşı çıkışı çapı (mm) | Çıkış gücü (kW) |
|---|---|---|---|
| B1S1 | 88×70 | JIS 5K 150A _166.6 | 2.2、3.7 |
| B1S2 | 110×80 | JIS 5K 200A _218 | 3.7、5.5 |
| B1S3 | 131×100 | JIS 5K 200A _218 | 5.5、7.5 |
| B1S4 | 156×125 | JIS 5K 200A _218 | 7.5、11 |
| B1S5 | 200×160 | JIS 5K 250A _269.5 | 11、18.5 |
| B1S6 | 250×200 | JIS 5K 300A _321 | 18.5、30 |
| B1S7 | 300×250 | JIS 5K 300A _321 | 30、45 |
The number in ( ) indicates overrated max. airflow.
Saving space
The electric blower occupies less space.
Compared to belt driven machines, the space is reduced by up to 50%.
High safety
Considering safety, there are no exposed rotating parts.
Maintenance simplification
Maintenance-free. No adjustment required, with only a few consumable goods and accessories.
1. Since the impeller and electric motor axle are directly coupled, there is no need to adjust belt tension or exchange belts.
2. The electric motors in this series use a sealed bearing so there is no need to re-grease.
3. The bearing is longer lasting compared to belt driven machines.
4. Drive unit can be pulled out from the back with the impeller on, so the rotor can be taken down and repaired easily without taking off the intake and discharge pipes.
NOTICE
If there is a foundation bolt implanted into the ground, you cannot pull out the drive unit by sliding it towards the back. (If you would like to have the drive unit to be pulled out by sliding towards the back, we can make special orders.) You may have to take off the electric wirings of the electric motor due to the electric wirings’ position.
